Edit Mode/ Select and Move |
Selects and moves part, text and image objects.
You can select multiple objects at once by specifying an area by a mouse drag select. You can also select multiple objects by clicking with [Shift] key held down. |
---|---|
Edit Mode/ Rotate Part |
Rotates the selected part. If you select this menu option, all vertexes of the
development are shown in red. First, click a point in red that is at the center
of parts to rotate. Then, drag to a point in red for rotation.
The rotation snaps to each 45 deg interval. |
Edit Mode/ Join/Disjoin Face |
When you apply the disjoin operation, the selected edge becomes
green. When you apply a join operation, the pointed edge becomes red. If you click a green edge, the connected faces get separated. If you click a red edge, the corresponding edge is pointed to with an arrow. The arrow's direction changes according to the mouse location. The arrow points to the face nearest to the mouse. If you click again, the corresponding face is stuck. If the original face and the corresponding face belong to different parts, the whole part moves. Otherwise, only a single face moves. |
Edit Mode/ Set Edge Color |
Sets the edge colors. You can also hide edges. |
Edit Mode/ Edit Flap |
Moves, adds and deletes flaps and changes the width. |
Edit Mode/ Input Text |
Lets you add text to the development at the place where you clicked. |
Edit Mode/ Check Correspondence between 2D and 3D |
Shows a list of parts. You can see the correspondence between 2D pattern and the 3D model by clicking a face. |
Insert Image |
Locates images to 2D pattern.
The image can be located under or above 2D pattern. You can change width and height by dragging red circles on the corners. |
Show Flaps | Switches between showing & hiding flaps. |
Show Edge ID |
Switches between showing & hiding edge IDs.
Edges with the same numbered edges should be pasted together when assembling. The size of the number can be changed from the [Configuration]-[Edge ID Configuration] window. |
Show Page Number |
Switches between showing & hiding the page number. The page number is shown at the bottom of the page in the center of the screen. (Printout is not affected.) |
Show Part Name | Shows name of parts. (Printout is not affected.) |
Apply Transparency of Print Setting | Applies the transparency set on [Print Setting] dialog to the display. |
Join Adjacent Edges | Joins the adjacent isolated edges in 2d pattern. |
Recalculate Parts Layout | Recalculates parts layout and resizes the parts layout. |
Flip Pattern | Flips the pattern. |
Change the Scale of Development/ Specify the Scale |
Change the scale of development by specifying the scale. |
Change the Scale of Development/ Scale Up by 10% |
Scale up the development by 10%. |
Change the Scale of Development/ Scale Down by 10% |
Scale down the development by 10%. |
Reset View Position | Resets the view position and shows the development so as to fit all pages into development view window. |
Show Grid | Shows grid lines. |
Snap to Grid | Make parts, strings and images snaps to a nearest grid when they are moved. |
Show Snap Line | Shows snap lines. Make parts, strings and images snaps to the lines when they are moved. |
Copy Development to Clipboard | Transfers the development to the clipboard in BMP format. You
can migrate data without using files, when you use the development in other
applications. Without reference to the number of pages, the bounding box of the pattern is copied. |